• If this is your first time visiting our NACBI Community Forum, Please go to the READ ME FIRST section for information about registering and helpful tips to use this site.
    Members Only sections are restricted and will indicate "No Content" until you are approved as a memeber of NACBI and logged in to the messgae board.

CPSC Amends Mandatory Safety Standard for Architectural Glazing Materials

Adair Inspection

Well-Known Community Member
NACBI Member
CPSC Amends Mandatory Safety Standard for Architectural Glazing Materials
March 11, 2016
Release Number: 16-117
WASHINGTON, D.C. – The U.S. Consumer Product Safety Commission (CPSC) voted 5-0 to amend the agency’s mandatory safety standard for architectural glazing materials. CPSC’s testing procedures, in place since 1977, are being replaced with more up-to-date procedures used in the ANSI Z97.1-2015 consensus safety standard. The new testing procedures go into effect 30 days after the rule is published in the Federal Register.

The standard applies to glazing materials used or intended for use in any of the following architectural products:

(1) Storm doors or combination doors,
(2) Doors (both exterior and interior),
(3) Bathtub doors and enclosures,
(4) Shower doors and enclosures, and
(5) Sliding glass doors (patio-type).

On June 26, 2012, the Commission received a petition from the Safety Glazing Certification Council (SGCC) requesting that the Commission initiate rulemaking to replace the testing procedures for glazing materials in certain architectural products set forth in the ANSI standard. SGCC stated that consumers and the glazing industry would be better served if the test procedures for glazing materials used in architectural products in 16 C.F.R. § 1201.4 were replaced with the ANSI standard because the ANSI test procedures are more efficient and modern, having been updated periodically, in contrast to the CPSC standard.

In 2013, the Commission voted to grant the petition, and in 2015, the Commission published a notice of proposed rulemaking (NPR). A new version of the ANSI standard was published after the NPR, which contains updates to several sections of the standard.

The amendment replacing the test procedures specified in CPSC’s mandatory standard did not involve a material change to the regulations and maintains the scope of products covered by the original regulation.

The U.S. Consumer Product Safety Commission is charged with protecting the public from unreasonable risks of injury or death associated with the use of thousands of types of consumer products under the agency’s jurisdiction. Deaths, injuries, and property damage from consumer product incidents cost the nation more than $1 trillion annually. CPSC is committed to protecting consumers and families from products that pose a fire, electrical, chemical or mechanical hazard. CPSC's work to help ensure the safety of consumer products - such as toys, cribs, power tools, cigarette lighters and household chemicals -– contributed to a decline in the rate of deaths and injuries associated with consumer products over the past 40 years.

Federal law bars any person from selling products subject to a publicly-announced voluntary recall by a manufacturer or a mandatory recall ordered by the Commission.

To report a dangerous product or a product-related injury go online to www.SaferProducts.gov or call CPSC's Hotline at 800-638-2772 or teletypewriter at 301-595-7054 for the hearing impaired. Consumers can obtain news release and recall information at www.cpsc.gov, on Twitter @USCPSC or by subscribing to CPSC's free e-mail newsletters.

Adair Inspection

Well-Known Community Member
NACBI Member
no problemo